• <optgroup id="uemyc"><li id="uemyc"></li></optgroup><ol id="uemyc"><output id="uemyc"></output></ol>

    1. <optgroup id="uemyc"></optgroup>
      <span id="uemyc"><sup id="uemyc"></sup></span>

      One out of six automatic blow molding machine

      TH-2T5L/F series automatic blow molding machine is a two-step blow-type automatic blow molding machine of our factory. It can blow 2L container from one out to one, and it can blow 2L container. Blown 25 ml to 2 liter multi-function automatic blow molding equipment. It is suitable for the packaging of edible oil bottles, carbonated beverage bottles, mineral water bottles, cosmetic bottles and large-diameter bottles of any shape made of PET plastic.

      Machine features:

      1. Adopt advanced microcomputer control system with stable performance;

      2, using infrared light tube heating, strong penetrating power, the preform is rotated and heated, the track is revolved, heating is uniform, fast and reliable;

      3. The width and height of the lamp tube and heating zone in the heating zone can be adjusted to suit the warming of the preforms of different structures, and there is an automatic temperature discharge device to ensure the constant temperature of the drying tunnel;

      4. Each mechanical action has a safety self-locking device. When a certain process fails, the program will automatically switch to a safe state;

      5. Each action is driven by a cylinder, does not use an oil pump, and has the advantages of no pollution and low noise;

      6. The design of the gas path divides the action and the blowing into three parts to meet the needs of different pressures for blowing and moving;

      7. It adopts high pressure and double curved arm connecting rod clamping, strong clamping force and automatic compensation of mold thickness.

      8, the operation method is manual, fully automatic two ways;

      9. Safe and reliable unique valve position design makes the gas path clear at a glance;

      10. The production process is fully automated, with the advantages of low investment, high efficiency, convenient operation, simple maintenance and safety.

      11, the bottle scrap rate is less than 0.1%

      Clamping                                             Clamping forceKN360
      Clamping strokemm100
      Stretching strokemm370
      Bottom strokemm30
      Cavity pitchmm86
      Number of cavitycavities6
      Container                                    Theoretical outputbph6000-7000
      Max container volumeL0.6
      Max.neck outer diametermm18-38
      Max. container diametermm76
      Max. container heightmm260
      Electrical system                           Number of Lamppcs42
      Max. heating powerKW80
      Installed powerKW86
      Actual electricity consumingKW24
      Air  system                           Operating pressurekg/cm27
      Low pressure air consumptionLtr/min600
      Blowing pressurekg/cm2≤35
      High pressure air consumptionLtr/min3000-4000
      Machine           Machine sizem4.8×1.7×2.2
        Machine weightT5.0
      Remark1.The actual output depends on the preform quality and bottle shapes.        2.Specifications are subject to change without notice.

    2. <optgroup id="uemyc"><li id="uemyc"></li></optgroup><ol id="uemyc"><output id="uemyc"></output></ol>

      1. <optgroup id="uemyc"></optgroup>
        <span id="uemyc"><sup id="uemyc"></sup></span>